Even though the Xbox One is a widely used gaming system, it is not immune to technical difficulties. There are instances when it simply won’t power on.
The Xbox One lacks the Red Ring of Death and other obvious visual indicators of hardware failure found in the Xbox 360. If the gadget won’t power on and displays an error code, you’ll need to eliminate potential causes in descending order of probability.
Ways to Solve Your Xbox Won’t Turn on Problem
The Xbox One can be relied on to function normally and reliably. There are, however, times when your Xbox might not power on. Even if your Xbox won’t power on, we’ll do what we can to get it working again.
Here, we’ll discuss some time- and effort-saving strategies for reactivating your Xbox. If your Xbox One isn’t booting up, read on to see what you should do.
Read Also:
- This Device is Blocked By Access Control in The Router
- Remove Write Protection From USB Drive in Windows 10
- Session “Circular Kernel Context Logger” Stopped Due To The Following Error: 0xc0000188
Solution 1: Make Sure Your Xbox One Controller is Working
In the event that you normally power on your Xbox One with the controller, you should check for peripheral malfunctions before assuming the console is at fault.
Step 1: Try turning on the console by pressing the Power button. 1. Your controller may be malfunctioning if your system powers on normally.
Step 2: Using the controller, press the Xbox button to test if the console powers up. The batteries may be dead after a while if nothing happens, therefore you may need to charge them or get new ones.
Step 3: Try hitting the Xbox button again, and if that doesn’t work, try plugging the controller straight into the console.
Step 4: Use a different Xbox One controller. Whenever you have access to a different controller that can power up the Xbox One, you should swap it out.
Solution 2: Vent Your Xbox On
When playing, if your Xbox One suddenly turned off and won’t switch back on, it may have overheated.
Step 1: Make sure the Xbox One’s vents aren’t being obstructed by anything. The console’s airflow can be hampered if its ventilation system is blocked in any way. This results in the heated air being unable to leave, leading to the console powering down to protect its internal components from overheating.
Step 2: You should let your Xbox One cool down for a while. Also, make sure it has enough of airflow by putting it in a well-ventilated room.
Step 3: After waiting for the console to cool down, try turning it back on by pressing the Power button again.
Solution 3: Check Your Xbox One’s HDMI Cable
You may need to replace the HDMI cable if the Xbox One lights up but displays nothing.
Step 1: Then, ensure that the Xbox One and TV are correctly linked with the use of an HDMI cable. If the TV won’t turn on, try plugging in an alternate HDMI cable.
Step 2: Try a different HDMI cable to see if it helps, and if the Xbox One is still not recognizing a display, try that.
Solution 4: Check your Xbox One’s Power Supply
Problems with the power supply are the most common cause of an unresponsive Xbox One.
Step 1: Plug the console’s power cord into an AC wall outlet and make sure it is securely put in the console’s rear.
Step 2: If that’s fine, move on to step two, which is testing the outlet with a digital multimeter or by plugging in a known-good electrical item to see if it powers on.
Solution 5: Do a Power Reset on Your Xbox One
In the event that the Xbox One itself is malfunctioning, a hard reset should be attempted; the system’s internal power supply could be at fault.
Here are the steps you should take to reset the external power source for your Xbox One X or S: Then, wait ten seconds after unplugging the console’s power cord from the back of the system before reconnecting the wire.
Just plug the cord back in and hit the Xbox button on the console’s face to get started.
Step 1: If it powers on, you’re good to go.
Step 2: The original Xbox One’s external power source can be reset by:
One should first remove the console’s power cable, the power supply’s cable, and the wall outlet’s cable.
Step 1: After a 10-second break, plug the power brick back into the wall and the console back into the power brick.
Step 2: Contact Microsoft for assistance if the computer continues to be unresponsive.
Read Also:
Conclusion
There could be a number of reasons why your Xbox won’t power on. In this article, we’ll go over the causes and show you how to get your Xbox back up and running. Take your time reading through the available fixes so you can determine what’s wrong with your Xbox One.
When the Xbox One malfunctions, the root problem is not immediately obvious, unlike with the PlayStation systems. The cause of your Xbox One’s failure to power on, for instance, may be obscure.
Power supply and other hardware issues are more common causes of failure. There is no doubt that the Xbox One is one of the most popular gaming systems ever. The console may malfunction because it is eight years old. Eliminating possible causes of issues is essential.
