How To Fix A Device Which Does Not Exist Was Specified

Issues relating to the hard drive can not be disregarded, as all of our critical files, papers, and images remained on the hard drive. So it is usually a good practise that the difficulties related to the hard disc must be rectified as soon as feasible.

One of the many hard drive-related problems is that a device that does not exist was listed as an option. This is a catastrophic error, and a new hard disc may be required to fix it.

In some cases, users have claimed that this error prevents them from accessing a particular drive or drives.

A Device Which Does Not Exist Was Specified

Every time the users try to open the drive a device that does not exist was specified error arises. The sources of this problem, as well as several potential workarounds, will be covered in this guide.

How to Fix A Device Which Does Not Exist Was Specified Error

As such, let’s dive into some potential solutions to the “device which does not exist was specified” error and see what we can find.

Although there aren’t enough techniques to tackle the issues, yet some users have identified some workaround about this issue.

Solution 1: Restart Computer

Restarting the computer completely is the first thing you can attempt. The computer must be turned off before the power cord is removed. Wait for a while and start your computer again.

It’s absurd how simple it is to solve many problems just by restarting the computer. If you reboot your computer, your browser, RAM, system files, and other apps will all revert to their original settings.

There is no need to restart computer a couple of time, if this approach cannot fix the fault, go to next option.

Solution 2: Disconnect then Reconnect Hard Drive

If the error occurs even after the system then you have to manually unplug the hard disc from the slot and then reconnect it. Multiple reports of the device not starting have been resolved using this technique.

There was a problem specifying a device that does not exist (error code 10). Sometimes even after restarting the changes don’t get active in order to completely implement the changes you have to disconnect the hard disc and then reattach the drive.

After removing the hard drive, you should also clean the port it was plugged into.

Solution 3: Rescan Disk in Disk Management

Please be aware that this is only a temporary solution, and the issue may return once you restart the computer.

Step 1: The first thing you need to do is head into Disk Management.

Step 2: Select “Rescan Disk” from the “Action” menu.

Step 3: Be patient while the scan completes.

Solution 4: Uninstall the Device from the System

Step 1: In order to fix a device, step one is to access its management interface (Disk Management).

Step 2: Select “Properties” from the menu that appears after right-clicking the drive.

Step 3: Select the “Driver” menu, then “Uninstall Device,” and finally “OK.”

Step 4: Reconnect the gadget and then launch Windows File Explorer to access the files on it.

Step 5: Try opening the drive again and see if the issue is fixed.

Conclusion

This notice could have appeared in the file explorer when you attempted to access the drive. Even though Windows recognises the disc drive, you may not be able to view its basic properties if the error occurs.

There are, however, a few solutions that can help you get rid of this warning. Despite the fact that this error might be brought on by hardware difficulties such as a malfunctioning USB port or SATA drive.

However, other common reasons for this error message include insufficient permission, a mismatched drive letter, and obsolete motherboard chipset drivers.