With Microsoft’s help, Windows machines on the same network can share files and data wirelessly. Nonetheless, a notification with the error code 0x80070035 may be displayed to the beginning user.
No such network gateway could be located. There are a number of potential origins for this problem, but you can fix it using the methods below. If you’re still having problems, please try the solutions provided below.
What Does Error Code 0x80070035 Mean?
Every issue has its own unique code and message that describes the error in sufficient detail for a user to determine what went wrong. When your device is having trouble locating the footprint of an active network, this is the problem they’re addressing.
Although this may seem like a minor point, it is crucial to keep in mind that there are other potential reasons and locations for this issue within the OS. This makes it difficult for someone without technical training or experience to resolve the issue alone.
Read Also:
- Fix This Person is Unavailable on Messenger
- Failed To Download File, The File Contents Differ From What Was Expected.
- Your CPU Supports Instructions That This Tensorflow Binary Was Not Compiled To Use: AVX2
Windows Network Error Code 0x80070035 Repair Guide
There are a variety of potential origins for the Windows 10 Network Error 0x80070035, however some broad approaches can help. Follow the steps below to see if any of them help you fix the issue.
Method 1: Reinstall Network Adapter Drivers
If updating your network drivers doesn’t work, try uninstalling and reinstalling your network adapter drivers. To do so, just refer to the procedures presented below.
Step 2: To access the run dialog, use the Windows key plus R.
Step 3: Simply enter “devmgmt.msc” and the appropriate folder will open.
Step 4: Access your drivers by double-clicking the “Network Adapters” menu item.
Step 5: In order to remove the driver from your computer, select the “Uninstall Device” menu item.
Step 6: Either go back to the manufacturer’s website and redownload the drivers, or use the “Scan for Hardware Changes” button up top to have Windows reinstall the drivers automatically.
Method 2: Enable NetBIOS over TCP/IP
Step 1: Then, while holding the Windows key, press R. Then, in the box that appears, type ncpa.cpl and hit OK.
Step 2: After that, select “Properties” from the context menu after right-clicking the link.
Step 3: Choose “Internet Protocol (TCP/IP) Version 4” from the drop-down menu.
Step 4: Afterwards, select Advanced from the drop-down menu after selecting Properties.
Step 5: Click the “WINS” tab in the “Advanced TCP/IP settings” box.
Step 6: Choose “Enable NetBIOS via TCP/IP,” and then click Yes, from the NetBIOS settings.
Method 3: Sharing Folder
If you’re getting a “network path not found” problem, it could be because the path you’re trying to utilize isn’t publicly accessible. As a result, in this stage, we will examine the path’s properties to see if it has been made public. This is why:
Step 1: Launch Finder and go to where the folder is stored.
Step 2: To view the folder’s properties, right-click on it.
Step 3: Choose the “Advanced Sharing” option from the “Sharing” menu.
Step 4: To make a folder accessible to others, you can use the “Share this Folder” option found in the “Advanced Sharing” menu.
Step 5: The network path to the shared folder is now shown in the Sharing pane.
Step 6: In order to determine if the problem still exists, connect to the folder using this and look inside.
Method 4: Change Network Security settings
If neither of them works, it may be a network issue; try restarting your router and seeing if that helps.
Step 1: Press the “Start” button, then “secpol.msc” in the search bar.
Step 2: Continue down the road: Network authentication using LAN Manager can be set in the policy settings on a local level. To change the authentication level for the LAN Manager, double-click the relevant option in Network security.
Step 3: Choose an option from the menu that appears. Transmit both LM and NTLM, and if NTLMv2 is available, utilize it for session security. To commit the new settings, click Apply and then OK.
Method 5: Reset TCP/IP
Step 1: In the right-hand corner, select the network icon and then click Open Network and Sharing Center.
Step 2: Choose Change adapter settings on the left side of the window.
Step 3: Choose Properties from the context menu after right-clicking the network card. If you’re utilizing a wireless connection, select the WiFi network adapter and continue with step 4.
Step 4: Choose the Install… option.
Step 5: Choose Protocol, then click the Add button….
Step 1: Here, choose the Reliable Multicast Protocol entry, and then confirm the installation by clicking OK.
Read Also:
Conclusion
If you are unable to access any network-related resources, you may see error 0x80070035. There may still be some access to the resource, as evidenced by the fact that you can ping it, signifying that it is online, and log in through remote desktop protocol (RDP).
But before we get started, let’s double check that you can ping the resource to make sure it’s online. If the resource responds to a ping and is found to be online, try each of the troubleshooting steps until you find the one that resolves the issue.