If you are in the middle of the work, and suddenly a blue screen appears, then you are facing the DPC Watchdog Violation error. Many window users have reported about DPC Watchdog Violation error. The DPC watchdog was a prevalent issue when Windows 10 was released. So, what the DPC watchdog violation error is and how to fix DPC Watchdog Violation annoying problem? DPC refers to “Deferred Procedure Call”. It usually monitors or tracks windows programs and PC performance.
There is a violation when the bug checker called watchdog detects a DPC that is running too long. It has been becoming one of the most common errors in the world of windows. You are not alone who is facing this problem on computer windows. It is occurred due to unsupported SSD firmware, old SSD driver version, hardware incompatibility or when system files are corrupted.
Sometimes, the DPC Watchdog Violation error could be caused by software conflict too. No need to worry about it, DPC Watchdog Violation error is possible to fix. When you are working with an SSD Windows computer, you need to check the firmware version of SSD and also make sure that it is an updated version.
- 1 How to Fix DPC Watchdog Violation BSOD Error in Windows
- 2 Conclusion
How to Fix DPC Watchdog Violation BSOD Error in Windows
However, Windows released an update to fix DPC Watchdog Violation Error, but not all system configurations were targeted. Still, some users have a DPC Watchdog Violation Issue. If you are receiving the BSOD with the error DPC Watchdog Violation, then follow these methods to fix the problem:
Method 1: Do a Clean Re-Installation of Drivers by Uninstalling First Using Display Driver Uninstaller
In this, there occur two situations. The first one, where you can log in and the second one, when you are not able to log in. If you want to get rid of the DPC Watchdog Violation error, you have to do it in Windows safe mode. If you can log in, then you should have a DDU installed ad saved on your desktop.
After this only you can boot into safe mode. If you are not able to log in, then boot the system into a safe way so that it can load with essential drivers and minimal settings. But before you boot into safe mode, always make sure that you have DDU downloaded in your system.
For Windows 8 and 10
To access safe mode in Windows 10, you need to prepare a Windows installation media and then boot up from it. If you can log in:
Step 1: Click the start button from the lower right corner.
Step 2: Hold on the shift key.
Step 3: Choose Shutdown-> Restart to get into Advanced Options.
If you can log in then restart the PC and interrupt the PC when you see the windows logo. Interrupt it for the 3 times. After doing this text will appear, “Preparing Automatic Repair”. When it appears, stop and wait for the system.
For Windows 7 or Lower
Restart your computer and repeatedly tap F8 until the Advanced Boot menu appears. If this option does not appear on the screen start over again and repeatedly tap the F8 key until you see this. When this option appears, select the safe mode. After doing this, you will be able to login to safe mode.
Once in safe mode, either copy the DDU file to your desktop in a new folder or save it onto a USB then or find the file where it was downloaded earlier and move it into a new folder so that extracted files will remain in the folder, else it will be extracted to the folder where you have got the files saved.
Once done, click the display driver uninstaller icon and run it. Then go ahead and select the card type from the drop-down, then select option 1 which is Clean and Restart. After finishing the driver cleaning, the system will reboot to normal mode. Now, you can go through the manufacturer’s site to install the latest driver for your Graphic card.
Method 2: Update the IDE ATA/ATAPI Controller Drivers
It is the most effective method according to a wide range of window users.
Step 1: Hold down the Windows Key and then press R.
Step 2: Type down devmgmt.msc.
Step 3: Open the IDE ATA/ATAPI controller section and select the one named SATA AHCI.
Step 4: Right-click on it and then select Update Drivers.
Step 5: Select Manual Update.
Step 6: When prompted with the location, select let me pick from the list of devices driver in my computer.
Step 7: After this, Restart your Computer.
You may need to repeat the same procedure every time after your windows update. This is a normal situation. So no need to hyper and worry about it.
Do Not Miss:
Method 3: Update the SSD Firmware If Available
Step 1: Click on the start menu and select the Control Panel.
Step 2: Click on View by small icons and search for the system.
Step 3: Click on device manager from the left panel.
Step 4: Double click on Disk Drives.
Step 5: Save the model number from the SSD and search the firmware on Google.
Step 6: Search a specific firmware and instructions on how to install the firmware for your drive.
Method 4: Uninstalling the Synaptic Default Drivers
Step 1: Hold the window key and Press R. Type devmgmt.msc
Step 2: Expand the mouse and other pointing devices.
Step 3: Right-click on Synaptic SMBus Touchpad and Click on Uninstall.
Step 4: Then restart the computer, and wait for the windows to install the most updated drivers for it.
DPC Watchdog Violation is a common error which many users face worldwide. You can use the methods mentioned above to remove this error. These steps will surely help you, and by using these methods, you can do your work without any discomfort and problems.