DNS_PROBE_FINISHED_BAD_CONFIG error is a common issue that shows up in the Google Chrome web browser. It happens when you are facing problems with your connection. There is a possible way to fix this issue as well. But there are various other reasons as well that lead to such errors.
DNS_PROBE_FINISHED_BAD_CONFIG is an error that is related to the DNS network service. Such type of errors usually occurs when a particular web address is not reachable. DNS_PROBE_FINISHED_BAD_CONFIG error is not related to browsers directly.
DNS_PROBE_FINISHED_BAD_CONFIG error occurs due to various reasons such as network problems, and faulty configure settings, DNS server inaccessibility, or Firewall. DNS_PROBE_FINISHED_BAD_CONFIG error prevents access to many websites if the DNS server is not able to translate the names of outside servers either due to corrupted settings or other reasons.
- 1 How to Fix DNS_PROBE_FINISHED_BAD_CONFIG Error
- 2 Conclusion
How to Fix DNS_PROBE_FINISHED_BAD_CONFIG Error
Although it sounds a bit complicated, it is not. You can fix the error without needing to understand all DNS-related characteristics to fix DNS_PROBE_FINISHED_BAD_CONFIG error. We have provided below a few steps to deals with such types of errors.
Method 1: Use a Different Browser
The DNS_PROBE_FINISHED_BAD_CONFIG error can arise if a web browser itself faces some issues while accessing some websites. Try accessing the web address using some other web browser, to check if you are a victim of a faulty browser. Discard your old browser until the new update, if the DNS_PROBE_FINISHED_BAD_CONFIG error does not occur.
Method 2: Clear Browsing History
The DNS_PROBE_FINISHED_BAD_CONFIG error may have been caused due to specific temporary files that have got accumulated in your system. You can get rid of the issue by clearing the Cookies, Cache, and Temporary files. You can do the same by following steps:
Step 1: Open History in your browser.
Step 2: Click on Clear browsing data.
Step 3: Select the option of clearing cookies and cached data.
Step 4: Click on clear data.
Method 3: Change DNS Address
Step 1: Click on Network and Sharing Center in the Control Panel.
Step 2: Open Change adapter settings.
Step 3: Select your LAN.
Step 4: Click on the Properties tab.
Step 5: Choose Internet Protocol Version 4 (TCP/IPv4).
Step 6: Then, click on Properties.
Step 7: Pick the Use the Following DNS Server Addresses option.
Step 8: Type 220.127.116.11. in the Preferred address bar.
Step 9: Type 18.104.22.168. in the Alternate address bar.
Step 10: Click Validate settings upon exit and click on OK.
Step 11: In the end, restart the computer system.
The DNS_PROBE_FINISHED_BAD_CONFIG error message would not pop on to your screen again, once the DNS has been configured manually. There are chances that the error does not get fixed with this method. So, you can use other methods.
Method 4: Reset IP Configuration
IP configuration can also lead to the DNS_PROBE_FINISHED_BAD_CONFIG error. So, you can solve this error by resetting the IP configuration. You can reset the IP configuration in the following ways:
Step 1: Click on the Start button.
Step 2: Open the Run dialog box.
Step 3: Type “cmd” in the run command, and press the enter key.
Step 4: Type in the following commands, in the command video:
netsh int IP reset netsh Winsock reset ipconfig/flushdns ipconfig/renew
Step 5: Lastly, restart the computer system
Method 5: Update Network Drivers
Outdated software also can result in DNS_PROBE_FINISHED_BAD_CONFIG error. If your software is not updated, then you have either faced or can face such types of errors. You can try updating the drivers to fix the DNS_PROBE_FINISHED_BAD_CONFIG error. The measures to do the same are:
Step 1: Press Windows Key + X.
Step 2: Choose Device Manager.
Step 3: If there are any updates for the drivers, then update the drivers.
Step 4: Lastly, Restart the system.
If the error in your system is due to an outdated driver in your system, the issue will be fixed. But if that was not the case, then you can try different methods that will help you.
Method 6: Disable Firewall and Antivirus Programs
DNS_PROBE_FINISHED_BAD_CONFIG error can also arise due to the Windows security features such as the Firewall and Anti-virus software. These features block the websites if they find that site is suspicious. So, This error can be solved by disabling the firewall and Antivirus feature of your system.
But, this method carries a lot of risks as such antivirus features protect your system from any threat or risk that can be caused by certain harmful sites. Blocking this feature makes your system vulnerable to attacks without firewalls or Anti-Virus. If you have blocked your antivirus feature, then you will have to be careful as to what sites you visit while your Firewall is turned off.
Method 7: Disconnect and Reconnect to Network
The DNS_PROBE_FINISHED_BAD_CONFIG error can arise due to issues with the router of your LAN. You can solve the DNS_PROBE_FINISHED_BAD_CONFIG error by disconnecting and reconnecting to the network. It usually fixes the error if the router is causing the error. You can do so, in the following steps:
Step 1: Click on the network icon on the taskbar.
Step 2: Click the network connected to and disconnect.
Step 3: Switch off the router and switch it on after a few minutes.
Step 4: Now, connect to the network.
These are the methods that will help you to fix the DNS_PROBE_FINISHED_BAD_CONFIG error in your system. You can try whichever method helps you in solving the issue.